Heavy Duty Conveyor Belt Fasteners, belting clips, conveyor belt repair

Heavy Duty Conveyor Belt Lacing Systems

The MATO Heavy Duty Belt Lacing Systems include:

• U60 Series
• U30 Series
• S30 Series
• E30 Series
• H30 Series

HD Safety System U60

Machine Install Fastener

The MATO HD Safety System U60 is a development from the reliable System U30. It has been designed for use on high tensile conveyor belts with large pulley diameters. The main applications are:

• Coal Mining

• Ore Mining
• Cement & Steel plants

Belt strength in kN/m	up to 1250	up to 1600	up to 3500
Belt thickness in mm	8-12	12-16	15-18
Fasteners:
Series standard	U65	U67	U68
Series sealed	U65+	U67+	U68+
Connecting pins:
Long Life	P2C/P2CG	P3C/P3CG	P4C/P4CG
Extreme wear	P2K/P2KG	P3K/P3KG	P5K/P5KG
Diameter in mm	6.4	7.1	8.5

HD Safety System U30

Machine Install Fastener

HD Safety System U30

The MATO Safety System U30 is extremely effective when installed in high strength belts where safety and reliability is essential. The main applications are:

• Coal Mining
• Ore Mining
• Gravel Pits and Quarries

• Cement and Steel plants
• Snowcats
• Industry

Belt strength in kN/m	up to 1050		up to 1400		up to 3500
Belt thickness in mm	5-9	7-11	8-12	10-14	12-15	15-18
Fasteners:
Series standard	U35A	U35	U37A	U37	U38A	U38
Series sealed	U35A+	U35+	U37A+	U37+	U38A+	U38+
Connecting pins:
Standard	P1S/P1SG	P1S/P1SG	P2S/P2SG	P3S/P3SG	P3S/P3SG	P4S/P4SG
Long life	P1C/P1CG	P1C/P1CG	P2C/P2CG	P3C/P3CG	P3C/P3CG	P4C/P4CG
Diameter in mm	5.3	5.3	6.4	7.1	7.1	8.5

Standard System S30S

Machine Install Fastener

Standard System S30

The MATO Standard System S30 is effective for use in belts up to 1400 kN/m. The main applications are:

• Coal Mining
• Gravel Pits and Quarries

• Cement and Steel plants
• Industry

Belt strength in kN/m	up to 1050		up to 1400
Belt thickness in mm	5-9	7-11	8-12	10-14	13-16
Fasteners:
Series standard	S35AS	S35BS	S37AS	S37BS	S37CS
Series sealed	S35AS+	S35BS+	S37AS+	S37BS+	S37CS+
Connecting pins:
Standard	P1S/P1SG	P1S/P1SG	P2S/P2SG	P3S/P3SG	P3S/P3SG
Zinc plated cable/ Stainless steel cable	L1/L1S	L1/L1S	L2/L2S	L3/L3S	L3/L3S
Diameter in mm	5.3	5.3	6.4	6.9	6.9

Eco System E30

Machine Install Fastener

Eco System E30

The MATO Eco System E30 is effective for use in belts up to 1400 kN/m. The System E30 is a reliable and economic system recommended for use in conveyor belts where it's necessary to change splices frequently. The main applications are:

• Coal Mining
• Gravel Pits and Quarries

• Cement and Steel plants
• Industry

Belt strength in kN/m	up to 1050		up to 1400
Belt thickness in mm	5-9	7-11	8-12	10-14	13-16
Fasteners:
Series standard	E35A	E35	E37A	E37	E37B
Connecting pins:
Standard	P1S	P1S	P2S	P3S	P3S
Zinc plated cable/ Stainless steel cable	L1/L1S	L1/L1S	L2/L2S	L3/L3S	L3/L3S
Diameter in mm	5.3	5.3	6.4	6.9	6.9

System H30

Hammer Installed Fastener

System H30

The MATO Hammer System H30 is recommended for belts up to 1400kN/m and 5 to 14mm thick. The fastener has pre-set staples and is quick and easy to install. The plate sets itself to the belt thickness making it ideal for worn belts. The fastener is supplied in strip lengths to suit different belt widths and is recommended for use in the following industries:

• Coal Mining
• Aggregate

• Agriculture
• General Industry

Rated Belt strength in kN/m	up to 1050		up to 1400
Belt thickness in mm	6 - 9	7 - 11	8-12	10 - 14
Fasteners:
Material stainless steel plate and staple	H35AS	H35BS	H37AS	H37BS
Material carbon steel plate and staple	H35AE	H35BE	H37AE	H37BE
Connecting pins:
Armour wrapped stainless steel	P1S		P2S	P3S
Stainless steel cable	L1S		L2S	L3S
Zinc plated cable	L1		L2	L3
Diameter in mm	5.3		6.4	6.9

Belt Lacing Machines To Suit HD U60, U30, S30, E30
	Manual: . Advancing and fastening system is performed manually. . The screw clamping frames are available in various sizes to suit the required belt width.
	Pneumatic: . Advancing is performed manually and fastener installation is performed pneumatically. . The screw clamping frames are available in various sizes to suit the required belt width.
	Hydraulic: . Advancing is performed manually and fastener installation is performed hydraulically. . The screw clamping frames are available in various sizes to suit the required belt width.

Belt Lacing Tools
To Suit H30 Hammer Tool

.	The tool bed is lightweight making it easy to carry. The punch and holder are easy to operate and designed to give long service life. The tool will install H35A and H37 fasteners by simply turning the belt stop pins. The fastener strip is installed by locating onto the belt stop pins and secured by positioning the retaining rod through the holes in the belt stop pins.
.	Standard sizes are available for belt widths 900, 1050, 1200, and 1350mm. Other sizes are available upon request.

Connecting Pins To Suit Heavy Duty Fasteners
	PKG . Special steel cable with armour wrap for longest service life. Also with a screw thread for use with sealed fasteners. . Standard eg P3KG	LS . Low cost wire version: - Stainless steel cable
	PSG . Stainless steel cable with armour wrap, also with a screw thread for use with sealed fasteners. . Standard: eg P3SG	L . Low cost wire version: - Zinc plated cable
	PS . Stainless steel cable with armour wrap. . Standard: eg.P1S

Accessories For Lacing Machines
	Belt Skiver . If the belt cover is 2mm or thicker it is recommended to skive leaving 1-1.5mm of cover over the carcass. The belt skiver is used on the clamping frame of the belt lacing machine. . Various skiver blades are available for differing belt thicknesses.
	Screw Pin Insertion Tool . Pneumatic insertion tool for screw connecting pin. The screw connecting pin can be installed quickly and easily.
	Screw Pin Insertion Tool . Manual insertion tool for screw connecting pin. The screw connecting pin can be installed quickly and easily.
	Hammer Pin Driver . Using the hammer pin driver the MATO connecting pins can be installed easily and without damage.
	Wave and Bow Stop . Use the patented MATO system to prevent waves and bows in the belt. The tensioned wire rope will eliminate edge stress, improve connection of the two spliced belt ends and minimise scraper wear. . Different versions available for belts up to 1600kN/m.

Accessories
	Handsaver . Provides a safe and comfortable method of handling awkward objects and saves trapped fingers and cut hands. . Flats, channels, angles, tubes, rounds, H sections, conveyor belting may all be lifted and dragged easily, safely and quickly with this versatile tool. . Corrosion resistant finish.
	Hand Skiver . This skiver is a quick and easy tool for rebating the belt, allowing the fasteners to lie flush with the belt surface. This reduces wear between fasteners and scrapers resulting in longer lifetime of both.
	Belt Marker	Belt Knife
	Belt Marking Pen-Silver	Optimat Wire Cutter

top